pump video output
Moderator: Moderators
- BakaOrochi
- Korean!
- Posts: 148
- Joined: Wed Apr 06, 2005 5:04 pm
- Location: Chicago/Akita
- Contact:
No need to remove any internal casings. Just take the back off the wooden cabinet and everything will be staring right at you.
In addition to the VGA connector, you can also see part of the audio lines in that picture. They're the red and white RCA connectors. They plug into a standard 1/8" audio jack on the back of the system unit. Again, the connector is exposed without removing the top casing of the metal system unit, just the back access panel of the machine.
In addition to the VGA connector, you can also see part of the audio lines in that picture. They're the red and white RCA connectors. They plug into a standard 1/8" audio jack on the back of the system unit. Again, the connector is exposed without removing the top casing of the metal system unit, just the back access panel of the machine.
A normality test:
+++ATH
If you are no longer connected to the internet, you need to apply more wax to your modem: it'll make it go faster.
If you find this funny, you're a nerd.
If neither of the above apply, you are normal. Congratulations.
+++ATH
If you are no longer connected to the internet, you need to apply more wax to your modem: it'll make it go faster.
If you find this funny, you're a nerd.
If neither of the above apply, you are normal. Congratulations.
- BakaOrochi
- Korean!
- Posts: 148
- Joined: Wed Apr 06, 2005 5:04 pm
- Location: Chicago/Akita
- Contact:
-
- Beginner
- Posts: 2
- Joined: Fri Aug 03, 2007 2:26 pm
- Contact:
-
- Beginner
- Posts: 2
- Joined: Fri Aug 03, 2007 2:26 pm
- Contact:
wow i really havnt expacted this >_>lgolem wrote:Hack itRubbinnexx^2 wrote:i would be interested in enabling the s-video out of my fx machine.
can someone tell me what i have to do?
i would be thankfull if someone can give me something like a little tutorial what i have to change/replace or whatelse to enable the s-video out.
pump video output
Pump seems popular over there, they even have a forum dedicated to pumps, pumpdays.de , I don't remember much german from school but as long as you speak paintball you can generally understand it.
-
- Standard
- Posts: 312
- Joined: Thu Aug 19, 2010 8:47 pm
- Location: Hendricks Co.
Re: pump video output
I'm very fluent in Paintball. In fact, it's my native tongue.