Hello!

Don't be a stranger (or a lurker)...introduce yourself here!

Moderator: Moderators

Post Reply
User avatar
pinktofu
Light
Light
Posts: 14
Joined: Mon Jul 08, 2013 9:05 pm

Hello!

Post by pinktofu »

Hey everyone! I am out of Los Angeles, CA, and I am the owner of 2 DDR machines:

1. 6th mix full legitimate - came with med res monitor, replacing
2. 8th mix bootleg upgrade from 4th mix - very worn dance pad, refurbing
I also own a separate 8th mix system unit/pcb.
I purchased a memory card panel which I have yet to test, based on what I have read from these forums, it sounds like I need to connect it to the pcb via usb.

Thanks!
--Pinktofu
User avatar
MonMotha
Site Code Monkey
Site Code Monkey
Posts: 2505
Joined: Sun Jan 23, 2005 9:18 pm

Re: Hello!

Post by MonMotha »

Do NOT plug the memory card board into a PC (like an actual PC that you can plug a keyboard, etc. into, running Windows, Linux, whatever). The cable is USB, but it's not actually USB: it's JVS. It definitely won't work, and it might break things.

If by "PC" you mean the "system unit" in the machine, then yes. It plugs into the "USB port" on it, which is again not actually USB but JVS. This ONLY applies to the original "System 573" model hardware used by 1st-Extreme. Some of the very new versions (DDR X and newer) are actual PCs and have their USB ports exposed. Same thing as I originally said applies: do NOT plug the card slots in. They won't work, and you might break them in this case. There's no support for the playstation card slots on versions of DDR newer than Extreme.
A normality test:
+++ATH
If you are no longer connected to the internet, you need to apply more wax to your modem: it'll make it go faster.
If you find this funny, you're a nerd.
If neither of the above apply, you are normal. Congratulations.
User avatar
pinktofu
Light
Light
Posts: 14
Joined: Mon Jul 08, 2013 9:05 pm

Re: Hello!

Post by pinktofu »

Hey! Thanks for the response.

I had no intention of plugging in the memory board board into a PC, but I appreciate the warning.

And yes, I meant the system unit to the memory card board. I assume if it not an actual USB slot, it does not use a USB cable? If so, any ideas where to acquire this cable?

My only intention is to use the memory card board and panel in my 6th mix unit.

Thank you!

--Pinktofu
User avatar
Fluffyumpkins
Moderator
Moderator
Posts: 6592
Joined: Wed Feb 02, 2005 1:53 pm

Re: Hello!

Post by Fluffyumpkins »

Welcome to IndyDDR.
User avatar
MonMotha
Site Code Monkey
Site Code Monkey
Posts: 2505
Joined: Sun Jan 23, 2005 9:18 pm

Re: Hello!

Post by MonMotha »

It does use a USB cable. The connectors are the same as USB, but it's not actually USB on the cable. It's very confusing and was done because the guys who devised the standard wanted a cheap, readily available cable. Any ol' USB cable will work. Just make sure you know what you're plugging it into.
A normality test:
+++ATH
If you are no longer connected to the internet, you need to apply more wax to your modem: it'll make it go faster.
If you find this funny, you're a nerd.
If neither of the above apply, you are normal. Congratulations.
User avatar
MonMotha
Site Code Monkey
Site Code Monkey
Posts: 2505
Joined: Sun Jan 23, 2005 9:18 pm

Re: Hello!

Post by MonMotha »

Also, hello, and welcome to IndyDDR, your go-to source for obscure technical details on the inner workings of DDR machines.

Also, probably your go-to source for information about music arcade games, including but not limited to, DDR, in the great state of Indiana. At least, sometimes, your go-to source for such information. You may also find some links to videos and/or pictures of cats which may or may not be captioned.
A normality test:
+++ATH
If you are no longer connected to the internet, you need to apply more wax to your modem: it'll make it go faster.
If you find this funny, you're a nerd.
If neither of the above apply, you are normal. Congratulations.
User avatar
Merk
Lady Banned Son of Switzerland
Lady Banned Son of Switzerland
Posts: 8289
Joined: Wed Feb 02, 2005 9:33 am
Location: Bloomington / Ft. Wayne
Contact:

Re: Hello!

Post by Merk »

I don't know how we got a reputation that we can answer obscure questions about DDR such that people from Australia and San Francisco post here but hey, the more the merrier.
Image
User avatar
Riot
Heavy
Heavy
Posts: 5373
Joined: Mon Feb 21, 2005 7:58 pm

Re: Hello!

Post by Riot »

Merk wrote:I don't know how we got a reputation that we can answer obscure questions about DDR such that people from Australia and San Francisco post here but hey, the more the merrier.
Pretty sure a lot of the technical articles from DDRFreak have IndyDDR watermarks and reference links.
Image
User avatar
Merk
Lady Banned Son of Switzerland
Lady Banned Son of Switzerland
Posts: 8289
Joined: Wed Feb 02, 2005 9:33 am
Location: Bloomington / Ft. Wayne
Contact:

Re: Hello!

Post by Merk »

Man does anyone remember when DDRfreak was still around? I remember going there back in the 4th mix days.
Image
User avatar
Potter
Heavy
Heavy
Posts: 4863
Joined: Wed Feb 02, 2005 6:57 pm
Location: above the abyss
Contact:

Re: Hello!

Post by Potter »

I love how indyddr is like THE ddr forum now. who would have thought we'd be the one to stand the test of timeeeee

we're famousss
Riot wrote:My hair alone is like 5mb.
Merk wrote:Badyyyyy.. wanna go fiiiish? wanna go.... fiiiiIIIIIIIIIIIIsh?? Wanna go fishin'?!?!?! Him's a Badyyyy
JzN
Standard
Standard
Posts: 55
Joined: Tue Apr 09, 2013 6:36 pm
Location: Land down under

Re: Hello!

Post by JzN »

mind you that for all of MonMotha's help and other IndyDDR'ers, there are now several more living DDR cabs around the world...

a Rare breed...
User avatar
Fluffyumpkins
Moderator
Moderator
Posts: 6592
Joined: Wed Feb 02, 2005 1:53 pm

Re: Hello!

Post by Fluffyumpkins »

Videogame collecting can be pretty cool.
Post Reply